Cirqus Voltaire Pinball
Bally (Williams) WPC-95 System

Sub-Woofers and Backbox Speaker Kits to Enhance Your Game

The Pinball Pro™ speaker systems have been developed to add new impact to your electronic pinball games.  Some of the older games are suffering from aging speakers and the ones that are still working are way undersized for the task. Most pinball machines have much more sound to offer than the original speakers can produce. By replacing weak backbox speakers and adding a subwoofer in the base cabinet, your pinball game can take on a whole new dimension of entertainment. The enhanced sounds make the game more fun to play by boosting the bass and clarifying the speech. The kits provide all the various parts needed for easy installation and can be installed in a matter of minutes, generally without soldering. Our Twin-Range backbox speakers are the latest technology, and feature powerful mid-range speakers with coaxial compression tweeters. A pair of Twin-Range speakers improves the left and right sound balance and range without sacrificing separation.  Our direct purchase of speakers from the manufacturer means you get the best value for the money.

Make your Bally Cirqus Voltair pinball machine more fun to play with the addition of a SW-2CV Sub-Woofer or SWTR-2CV full speaker replacement sound system. The backbox speakers in the full speaker replacement kit are dual compression tweeter and woofer units for better sound dispersion and over-all response.  They project mid and high frequency sound from both sides of the game helping center voices and overcoming the left speaker over-emphasis of this series of Williams game. A new set of speakers has such impact you will find it hard to quit playing.  The sub-woofer is mounted in an extension box under the game. If a standard SW-2V Sub-Woofer is placed in the original speaker location, the Ringmaster brackets hit the speaker housing when the playfield is lifted for servicing.  An alternative is to cut a new hole in another location on the cabinet floor, but most people opt for the extension box.  If you choose only to replace the backbox speakers to get better sound balance, use the TR-2B kit to get the proper fit on the Cirqus Voltair light panel.

Back Box Speakers - Better Than Original Equipment

Twin-Range backbox speakers are the latest technology, and feature a powerful mid-range speaker with a coaxial compression tweeter. A pair of Twin-Range speakers improves the left and right sound balance and range without sacrificing separation. Speakers are available in 4,5, 6 and 4x10 inch sizes to outfit any game.

Back Box Speaker Kits

The backbox speaker kits supply all the various parts and wiring needed for easy installation. They can be installed in a matter of minutes without soldering by following our simple installation instructions
.

SW-2CV Click on image to enlarge SW-2CV Speaker Upgrade for Williams WPC-95 (DCS) Pinball Machines This kit includes an 8 inch sub-woofer with attached network, cabinet adapter plate, and clip-on volume control. This 150 Watt sub-woofer extends bass reproduction to 32 Hz. for unbelievable sound. No permanent modification is required to the pinball machine. The special design of the sub-woofer network routes the low frequencies to the sub-woofer. For machines manufactured after 10/1993 having the DCS sound system with two speaker driver outputs. The SW-2CV includes volume control for the back box speaker level and provides for greater bass output.   TR-2 Click on image to enlarge TR-2B Speaker Upgrade for Williams WPC-95 (DCS) Pinball Machines The TR-2B Backbox Speaker kit supplies all the various parts and wiring needed for easy installation. They can be installed in a matter of minutes and without soldering by following our simple installation instructions.  This kit includes one 5¼-inch SP-5 speaker, a spacer gasket and stud extenders, one 4-inch SP-4 speaker, an adapter, and a wiring harness with plug. Click here to verify game by picture