F10-1 DIY Modules kit for do-it-yourself installation
This kit has two PERFECT FLASH modules and a communications
link cable for creating your own installation.
The modules have easy to use screw terminal connections for
signal input and three bulb outputs. The modules will not sequence until the communication cable is plugged in between them.
The TURN terminal is for +12 volts from the turn/brake wire and the ground (GND) can be made to the chassis. L1, L2, L3 is for
the sequencing lamps in that order. Bulbs share negative common ground.
© Copyright 2010 International Decorator Supply Co. All rights reserved.